 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-21119 rev. A 08/06 MBR0530PbF SCHOTTKY DIODE 0.5 Amp IF(AV) = 0.5Amp VR = 30V Major Ratings and Characteristics Characteristics I F(AV) (DC) VRRM IFSM @ tp= 10 ms sine VF TJ @ 0.5Apk, TJ= 100C range Description/ Features Units A V A V C This Schottky diode is ideally suited for low voltage, high frequency operation, as freewheeling and polarity protection. Small size of the package allows proper use in application where compact size is critical, fitting also the GSM and PCMCIA requirement. Surface mountable Very low forward voltage drop Extremely fast switching Negligible switching losses Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Value 0.5 30 10 0.35 - 65 to 150 Case Styles (A) 1 2 (K) SOD123 www.irf.com 1 MBR0530PbF Bulletin PD-21119 rev. A 08/06 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Value 30 Absolute Maximum Ratings Parameters IF IFSM Forward Current Max. Peak One Cycle Non-Repetitive Surge Current, @ TJ = 25C Value 0.5 75 10 Units A A A Conditions DC, TL = 126C 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied Electrical Specifications Parameters VFM VFM IRM CT Max. Forward Voltage Drop Max. Forward Voltage Drop Max. Reverse Leakage Current Max. Junction Capacitance (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Value (1) (1) (1) 0.375 0.430 0.250 0.350 20 130 90 10000 Units V V V V A A pF V/s @ 0.1A @ 0.5A @ 0.1A @ 0.5A VR = 15V VR = 30V Conditions TJ = 25C TJ = 125 C TJ = 25C VR = 5VDC (test signal range 100KHz to 1Mhz), TJ = 25C dv/dt Max. Voltage Rate of Change Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range (*) Max. Storage Temperature Range Value - 65 to 150 - 65 to 150 150 200 0.012 Units C C Conditions RthJL Max. Thermal Resistance Junction to Lead Rth(j-a) Max. Thermal Resistance Junction to Ambient Wt Approximate Weight Case Style Device Marking (*) dPtot 1 < dTj Rth( j-a) C/W Mounted on PC board FR4 with minimum pad size C/W 1 inch square pad size (1 x 0.5 inch for each lead) on FR4 board gr SOD123 BYWLC thermal runaway condition for a diode on its own heatsink 2 www.irf.com MBR0530PbF Bulletin PD-21119 rev. A 08/06 100 Tj = 150C Reverse Current - I R (mA) 10 10 125C 1 0.1 0.01 0.001 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 1 0.0001 0 5 10 15 20 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 0.1 Tj = 150C Tj = 125C Tj = 25C Junction Capacitance - C T (p F) 1000 T = 25C J 100 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 10 0 5 10 15 20 25 30 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 MBR0530PbF Bulletin PD-21119 rev. A 08/06 160 Allowable Case Temperature (C) Average Power Loss (Watts) 0.3 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 150 140 130 120 110 100 90 Square wave see note (2) D = 0.20 D = 0.25 D = 0.33 D = 0.50 0.2 D = 0.75 RMS Limit DC DC 0.1 80 0 0.2 0.4 0.6 (A) F(AV) 0 0.8 0 0.2 0.4 0.6 0.8 Average Forward Current - I Average Forward Current - IF(AV) (A) Fig. 5 - Forward Power Loss Characteristics Fig. 4 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 100 10 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 6 - Max. Non-Repetitive Surge Current (2) Formula used: TC = TJ - Pd x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 4) 4 www.irf.com MBR0530PbF Bulletin PD-21119 rev. A 08/06 Outline Table K J L B A SOLDERING PAD DIM A B C H J Millimeters Min 0.55 1.40 3.55 2.55 0.95 8 Max 0.70 1.70 3.85 2.85 0.10 1.35 0.5 0.15 Inches Min 0.022 0.055 0.140 0.100 0.037 Max 0.028 0.067 0.152 0.112 0.004 0.053 0.02 0.006 8C 2 cathode band C H 0.91 mm 0.036" 1.22 mm 0.048" 2.36 mm 0.093" K L M 1 4.19 mm 0.165" (A) 1 2 (K) SOD123 Tape & Reel Information Dimensions in millimeters Ordering Information Table Device MBR0530 Package SOD-123 Marking BYWLC Base qty 3000 Delivery mode Tape & Reel www.irf.com 5 MBR0530PbF Bulletin PD-21119 rev. A 08/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/06 6 www.irf.com |
Price & Availability of MBR0530
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |